Buying a saddle by looks or by a friend’s recommendation is a guess. Measure your sit bones at home in five minutes, enter the number, and get the width and relief type to look for. The second half picks between waist shorts and quick-access bibs.
Recommendation
How to measure your sit bones at home
- Place a piece of corrugated cardboard on a hard, flat chair or a low step. Aluminum foil on a folded towel also works.
- Sit on it in thin clothing, lean forward slightly as you would on your bike, and pull yourself down by gripping the seat. Lift your feet so your full weight rests on the cardboard. Hold for 30 seconds.
- Stand up and find the two deepest dents. Rubbing chalk or a pencil flat across the surface makes them easier to see.
- Mark the center of each dent and measure between the marks in millimeters.
- Repeat twice. If the results differ by more than 5 mm, measure again and use the average.
The formula
saddle width = sit bone width + posture allowance
upright +30 mm
moderate +20 mm
sporty +10 mm
shown as a range of ±5 mm
As you lean forward the pelvis rolls, and the contact area moves from the wide ischial tuberosities onto the narrower pubic rami in front of them. That is why an upright rider needs a wider saddle than a racer with the same sit bones. The allowances follow the step sizes widely used by saddle makers and bike fitters. The result is a range because foam, shell flex and shape all shift how wide a saddle feels.
Choosing the relief type
- Relief channel: a shallow groove along the center. Enough if you have no soft-tissue symptoms.
- Full cutout: an opening through the shell. Removes pressure from the center, but can concentrate it on the edges of the hole if the saddle is too narrow.
- Soft-nose or pressure-relief nose: soft material in place of a hole, designed to support tissue without edges.
- Short-nose shape: a truncated front that lets you rotate forward without the nose pressing in. Useful in a sporty position.
When the standard result does not fit
Your result falls between two stock widths
In an upright or moderate position choose the wider one. In a sporty position choose the narrower one if you have thigh rub, the wider one if you feel your sit bones hanging off the edges.
Sit bones over 140 mm
Many performance saddles stop at 155 mm. Filter the comparison table by width first, then choose among the models that remain.
Numbness on a correctly sized saddle
Check tilt and height with the bike fit pain checker. If numbness continues, stop riding that setup and see a bike fitter or clinician.
Waist shorts or bibs?
Bibs hold the chamois in place and remove waistband pressure, which matters more the longer you ride. Their drawback is the bathroom stop: classic bibs come off only after the jersey does. Quick-access bibs solve that in one of four ways:
- Stretch drop-tail: the back panel pulls down while the straps stay on. Fastest, nothing to fasten.
- Clasp or magnet: the straps detach at the back and reconnect by feel.
- Halter neck: a single strap lifts over the head. Simple, but layers must come up with it.
- Zip: a zipper around the back of the waist. Secure, slower with cold hands.
Common mistakes
- Measuring edge to edge of the dents instead of center to center.
- Sitting upright during the test when you ride leaning forward.
- Choosing saddle width by hip size. The two are not related.
- Wearing underwear under padded shorts. The seams defeat the chamois.
Where to go next
These tools give starting points, not medical or professional fitting advice. Formulas and data sources are listed on this page so you can check the reasoning. Spotted an error? Tell us and we will correct it.
